MEMMAKER for DOS, WIN 3.1x, Win '95.

Note: Whenever you see A:, B:, C: or D: within this text, A: and B: represent your possible floppy drives within your computer and C: and D: represent your possible hard disks within your computer. If you only have one (1) floppy drive, it is the first drive in your computer and considered A: - your hard disk would then be considered C:.

A: and B: can be switched in any example below to meet the needs of your computer system.

C: and D: can be switched in any example below to meet the needs of your computer system.

----------
Installing MEMMAKER Onto Your Computer
----------

This ZIP file contains all of the files required to run MEMMAKER on your computer (win 3.1 or win '95). MEMMAKER is a great utility for those individuals who do not know much about configuring their computer's conventional, extended and expanded memory. MEMMAKER handles everything for you. Follow the instructions below to download and install this utility.

After you have downloaded the MEMMAKER zip file, unzip it into the following directory (depending on the version of Windows you are running):
Win 3.1x = C:\DOS
Win '95 = C:\WINDOWS\COMMAND

Next, Close (or ShutDown) Windows and get back to a MS-DOS prompt. Once there, type MEMMAKER to start the utility. When it starts, choose the following options to properly configure this utility:

Express or Custom Setup = Choose Custom
Does Your Computer Require EMS Memory = YES
Specify Which Commands To Include In Memmaker = NO
Scan Upper Memory Aggressively = YES
Optimize Memory For Use With Windows = YES
Exclude Memory Rage (?????) = NO
Move BIOS Data into Upper Memory = YES
Keep Current EMM386 Inclusions and Exclusions = NO

When your computer reboots, if you are running Windows '95, you'll need to press F8 as soon as your computer BEEPS and begins to load the WIN'95 operating system. Keep pressing it until you see the Win'95 Boot Options Menu. Then choose "Command Prompt" (usually #6). Then your computer will reboot again and you should follow the same instructions to prevent WIN'95 from loading.

Finally, MEMMAKER will return and state "it is finished" and tell you how much memory it saved. At this point, press ENTER and you'll go back to a DOS prompt. Now, reboot your computer again and let it boot into windows. You're finished.

Download MEMMAKER for DOS, WIN 3.1x, Win '95.