|
|
|
|
| Technical Support
|
Instructions
for using the DTU Pro program are as follows.
The concept of using the DTU Pro program from AIQ to
export files from AIQ format into an ASCII file format
are rather simple. First, we want to export a block
of data (about 6 months) out to the ASCII files. After
that is completed, we want to export only TODAYS (or
a specific date range) out to the files to update them.
If something gets screwed up along the way, you can
always re-export the BLOCK of data again.
Set the DTU Program with the following options and attampt
an export
EXPORT
* MASTER LIST
* ASCII
RANGE
1. DATE RANGE should first be set for about 6 months
(ie. 01/01/00 - 07/01/00).
2. Subsequent exports: DATE RANGE should be set for
only one day, or the same (ie. 01/21/01 - 01/21/01)
for for a DATE RANGE that is needed to update the existing
files.
DESTINATION FILE
* APPEND
* FILE NAME should include your complete export PATH
and FILE EXTENSION (ie. C:\YOUR\DATA\DIRECTORY\*.ASC)
* NEW PATH ? = YES
* STOCKS
SPCL NAME EDIT
* NAME "DONT" (you name it) OK
** FOR INDEX's
* Change the EXPORT PATH (ie. C:\YOUR\DATA\DIRECTORY\FOR\INDEXS\*.ASC)
* Export only INDICIES.
After you have completed the export using the DTU Pro
program, you should start the PFP program and complete
the following to setup and read your AIQ ASCII files.
This procedure will completely SETUP the PFP program
for use with these new ASCII AIQ data files.
1. Start the PFP program
2. Click on FILE
3. Click on OPEN FILE TYPE
4. Click on AIQ ASCII files from the list
5. Use the DIRECTORY FOLDERS to select the proper DIRECTORY
where you exported the ASCII files.
6. Once you have chosen the proper directory, you may
need to change LIST FILES OF TYPE to '*.*' to show all
the files in the directory.
7. Once you see the files listed in the top left window,
double click on one to try to open it. Once the chart
appears, then the program is SET and ready to go with
these files..
|
|
|
